Basic Contouring 

Shows how to create simple Contours, setting a start point point and direction and how to perform basic machining instructions.

Importing DXF 

Shows how to import a DXF files into CAD and create Contours for milling and Patterns for Drilling 

Milling primitives  

Demonstrates the use of the Level 2 machining commands without using the CAD system. 

The Geometry Editor  

Demonstrates the use of the Geometry Editor to create geometry without using the CAD system. 

Level 2 - Engraving  

Shows to create engraving (text) using the Level 2 commands. 

Face Milling & Area Clear 

Demonstrates how to create multiple Contours by "dragging" around a parts of the drawing.  

Text Engraving, Face Milling  & Contouring

Demonstrates Engraving Text with different fonts, Contouring and Face Milling.

Thread Milling

Demonstrates Thread Milling.

Machining text as islands 

Shows how to create a part where the text is "raised" within an area.

Importing DXF into CAM 

Shows how to import a DXF file directly into the CAM module.

Importing DXF into CAM - 1 

Describes how to import a DXF file direct into the Turning module. A simple shape with no ambiguities.

Importing DXF into CAM - 2

Describes how to import a DXF file direct into the Turning module. A complex shape with drawing borders etc. How the CAD module is used to simplify the DXF file.